Maintenance Guide
A little routine care goes a long way toward keeping your Artisan Vent Hood looking its best. Since cleaning needs vary by metal and finish, follow the instructions below for your specific custom range hood.
Caring for a Copper Range Hood
Our copper range hoods are handcrafted from durable 16-gauge copper and finished with a clear protective coating. Gentle cleaning will help preserve the color and surface finish.
Routine Cleaning
For everyday care, dampen a soft cotton cloth with warm water and a mild, non-acidic soap. Gently wipe the surface to remove dust, grease, and cooking residue.
Choose a pH-neutral cleaner whenever possible. Strong dishwashing liquids, abrasive cleaning products, and aggressive scrubbing may affect the protective finish.
Removing Buildup
For heavier residue or occasional disinfecting, use a diluted household cleaner that is both non-corrosive and non-abrasive.
Apply the cleaner with a soft cloth and avoid using anything that could scratch the copper or damage its clear coating.
Drying the Surface
After cleaning—or whenever moisture collects on the hood—wipe the copper with a clean, soft towel. Drying the surface helps reduce water marks and streaking.
Wax Protection
A light coat of natural beeswax or a similar protective wax may be applied every three to six months, depending on how frequently the hood is used.
Spread a thin, even layer over the surface, then gently buff it with a clean, non-abrasive cloth.
Products to Avoid
Do not clean the copper with:
-Ammonia-based products
-Abrasive powders or liquids
-Rough sponges or scrubbing pads
-Strong acidic cleaners
These products can weaken the protective coating and cause the finish to lose its original appearance over time.
Caring for Brass Range Hoods and Stainless Steel Range Hoods
Brass and stainless steel are durable materials that require relatively simple upkeep. Regular dusting, gentle washing, and thorough drying will help keep the hood clean and attractive.
Remove Surface Dust
Use a clean microfiber cloth to gently remove dust. On stainless steel surfaces, always move the cloth in the same direction as the visible grain.
Wash Away Everyday Residue
Use warm water with a small amount of mild soap. Apply the solution with a soft cloth and gently wipe away grease, fingerprints, and normal kitchen buildup.
After cleaning, dry the entire surface with a clean cloth to help prevent water spots and streaks.
Cleaning Grease From Stainless Steel
When regular soap and water are not enough, use a cleaner or degreaser specifically made for stainless steel.
Apply the product with a soft cloth and wipe in the direction of the metal grain. For more stubborn marks, use a dedicated stainless steel cleaner, then rinse the area and dry it completely.
Simple Care Reminders
To protect the appearance of your range hood:
-Use only soft cotton or microfiber cloths.
-Choose gentle, non-abrasive cleaning products.
-Dry the metal after cleaning.
-Follow the direction of the grain when wiping stainless steel.
-Avoid harsh chemicals and rough cleaning tools.
Consistent, gentle maintenance is the best way to preserve the handcrafted finish of your Artisan Vent Hood.