Rich in character and defined by its sculptural form, this Artisan Vintage Weathered Copper Range Hood with Scalloped Trims ATHC-08 is designed to become a natural focal point within the kitchen. The silhouette begins with a clean rectangular crown before flowing into a broad, rounded body that gently expands through the center and settles into a substantial lower canopy. The generous proportions give the hood a strong presence, while the continuous curves create a sense of balance and refinement.

Rather than relying on decorative straps, rivets, or contrasting trim, the design draws its appeal from the relationship between form and finish. The smooth, uninterrupted surface allows the shape to take center stage, emphasizing the hood's sweeping contours and full-bodied profile. Its distinctive outline feels almost sculpted, with soft transitions that create depth from every angle.

The weathered copper finish gives the metal vent hood much of its personality. Layers of warm copper, bronze, and softly darkened tones create a naturally aged appearance that feels established rather than newly manufactured. The textured surface introduces subtle variation across the metal, adding richness and visual depth while preserving the understated nature of the design. The finish complements the hood's curved silhouette, bringing dimension to the broad expanse of copper without overwhelming the overall form.

A decorative scalloped apron wraps the bottom edge, introducing a handcrafted detail that immediately sets the piece apart. The repeating curved pattern softens the strong geometry of the canopy and adds a sense of rhythm to the design. While subtle, this feature gives the custom hood cover a distinctive identity and reinforces its custom-made character.

The combination of a rounded barrel-inspired silhouette, weathered copper finish, and scalloped apron creates a unique kitchen hood that feels both timeless and unique. Its presence comes not from excessive ornamentation, but from carefully balanced proportions, rich materiality, and details that reveal themselves through closer observation. Designed as more than a functional appliance enclosure, this hood serves as an architectural centerpiece that brings warmth, texture, and lasting character to the kitchen.

Specification	Details
Model	ATHC-08
Hood Body Material	304 stainless steel, solid brass, or pure copper, depending on the selected body option
Mounting & Depth	Wall mount: 22″ or 24″; island mount: 26″
Width	30″, 36″, 42″, 48″, 54″, 60″, 66″, or custom
Ventilation	390 CFM, 600 CFM or 1260 CFM; hood-only option available
Standard Shipping	Free; approximately 8–10 weeks after drawing approval
Expedited Shipping	Approximately 5–7 weeks after drawing approval; additional fee required

 

Wall Mount Range Hood Size Guide

Island Mount Range Hood Size Guide

Range Hood Ventilation Guide

Artisan Vent Hood offers three range hood ventilation options: an internal motor, a ductless conversion and a remote blower. Each system is designed for a different kitchen layout, installation requirement and noise preference.

1. Internal Motor

The motor is installed inside the range hood and exhausts cooking air outdoors through ductwork.

An internal motor, also called an internal blower, is the most common ventilation option for residential range hoods. The blower is housed inside the hood insert, where it pulls smoke, grease, heat and odors through the filters before directing the air outside.

Best for:
-Kitchens with an existing exterior duct
-New construction and kitchen remodeling projects
-Homeowners who want strong, dependable ventilation
-Projects that require a simple, integrated blower system

---

A remote blower separates the motor from the range hood insert. Smoke, grease and cooking odors are still captured at the hood and exhausted outdoors, but the blower motor operates farther away from the cooking area. Moving the motor away from the hood can reduce the motor noise heard directly above the range. Air movement through the filters and ductwork will still be audible.

Best for:
-Luxury kitchens and open-concept floor plans
-Homeowners who want a quieter cooking area
-Kitchens with suitable attic or remote installation space
-Custom construction projects where the ventilation system can be planned in advance

---

3. Ductless Conversion

Filtered air is recirculated back into the kitchen without an exterior duct.

A ductless range hood, also known as a recirculating range hood, is designed for kitchens where venting through a wall or roof is not possible. Instead of exhausting air outdoors, the system pulls cooking air through grease filters and activated charcoal filters. The filtered air is then returned to the kitchen through ventilation openings in the hood.

Best for:
-Kitchens where exterior ductwork cannot be installed
-Interior kitchen walls without roof or wall access
-Renovations with structural ducting limitations

---

Internal Motor vs. Ductless vs. Remote Blower

Feature	Internal Motor	Ductless Conversion	Remote Blower
Vents air outdoors	Yes	No	Yes
Motor location	Inside the hood	Inside the hood	Attic or approved remote location
Exterior duct required	Yes	No	Yes
Removes cooking heat and moisture	Yes	Limited	Yes
Reduces odors	Yes	Yes, through charcoal filters	Yes
Motor noise at the hood	Standard	Standard	Lower
Installation complexity	Standard	Lower	Higher
Best application	Most residential kitchens	Kitchens without duct access	Quiet, high-end kitchens

---

How Much CFM Does a Range Hood Need?

Artisan Vent Hood systems are commonly paired as follows:

Range Hood Width	Typical Blower Capacity
30″–36″	610 CFM
42″–48″	1150 CFM
54″–60″	1260 CFM

These are general product pairings rather than universal requirements. The final blower should be selected according to the cooking equipment, hood design, duct system and applicable local code.

---

Download Specifications

Click to download the specifications of different types of ventilation:

Download Internal Motor Installation Guide

Download Remote Motor Installation Guide

Download Ductless Ventilation Installation Guide

Every Artisan Vent Hood is made to order. Shipping options, costs, and delivery times may vary based on the size of your hood and where it is being delivered.

Order Processing

We typically begin processing your order within one business day. Orders placed on weekends or holidays may take a little longer to process.
Because each hood is custom made, the production timeline begins after you have reviewed, signed, and approved the final drawing.

Free Standard Shipping

Free standard shipping is available to most addresses within the United States.
The estimated total lead time is 40–50 business days after final drawing approval. This generally includes:
-20–25 business days for production and order preparation
-20–25 business days for shipping and delivery

Actual timing may vary depending on the size and design of your hood, as well as the delivery location.

Expedited Shipping

Need your hood sooner? Expedited shipping is available for an additional fee.
The estimated total lead time is 25–35 business days after final drawing approval, including:
-20–25 business days for production and order preparation
-5–10 business days for expedited shipping and delivery

Expedited shipping costs are based on the size of the hood and the delivery requirements. Contact our team for a quote. We can typically provide expedited shipping pricing within one business day.

Locations Excluded From Free Shipping

Free standard shipping is not available for deliveries to:
-Alaska
-Hawaii
-Oregon
-Puerto Rico
-Canada
-Remote locations

Additional shipping charges may apply to these destinations. The cost is based on the package size and the distance to the delivery address.
If your order is being delivered to one of these areas, please contact us before placing your order for a shipping estimate.

Duties and Taxes

For orders delivered within the United States, applicable customs duties and taxes are included.
For orders shipped outside the United States, the customer is responsible for any customs duties, import taxes, or other fees charged by the destination country.

International Shipping

We offer international shipping to select destinations. Shipping costs and estimated transit times vary by location.
To request an international shipping quote, send our team your delivery address and the details of the range hood you are interested in. We will provide the available shipping option, estimated cost, and expected delivery timeframe.

How Your Order Will Ship

We select the shipping method based on the size and weight of your hood, the delivery address, and the requested delivery speed.
Your order may be shipped by:
-DHL for eligible expedited deliveries
-Freight carrier for large or heavy range hoods
-Local carrier for remote areas or locations requiring special delivery arrangements

DHL expedited service is available for an additional charge. The final cost depends on the size of the range hood.

Tracking Your Order

Once your order ships, we will email the available tracking information to the email address provided at checkout.
If you have trouble locating your shipment or believe it may be delayed, please contact our customer service team for help.

Damaged or Missing Orders

Please check your order as soon as it arrives.
If the packaging or range hood appears damaged, take at least three clear photos showing the damage and contact us right away. The photos will help our team review the issue and assist you with the next step.
If you believe your shipment is missing, please let us know as soon as possible so we can look into it.

Returns and Refunds

For information about returns and refund eligibility, please review our separate Return & Refund Policy.

Questions About Shipping?

If you have questions about shipping costs, delivery areas, expedited service, estimated lead times, or tracking, please contact the Artisan Vent Hood team.
Email: info@artisanventhood.com

A little routine care goes a long way toward keeping your Artisan Vent Hood looking its best. Since cleaning needs vary by metal and finish, follow the instructions below for your specific custom range hood.

Caring for a Copper Range Hood

Our copper range hoods are handcrafted from durable 16-gauge copper and finished with a clear protective coating. Gentle cleaning will help preserve the color and surface finish.

Routine Cleaning

For everyday care, dampen a soft cotton cloth with warm water and a mild, non-acidic soap. Gently wipe the surface to remove dust, grease, and cooking residue.

Choose a pH-neutral cleaner whenever possible. Strong dishwashing liquids, abrasive cleaning products, and aggressive scrubbing may affect the protective finish.

Removing Buildup

For heavier residue or occasional disinfecting, use a diluted household cleaner that is both non-corrosive and non-abrasive.

Apply the cleaner with a soft cloth and avoid using anything that could scratch the copper or damage its clear coating.

Drying the Surface

After cleaning—or whenever moisture collects on the hood—wipe the copper with a clean, soft towel. Drying the surface helps reduce water marks and streaking.

Wax Protection

A light coat of natural beeswax or a similar protective wax may be applied every three to six months, depending on how frequently the hood is used.

Spread a thin, even layer over the surface, then gently buff it with a clean, non-abrasive cloth.

Products to Avoid

Do not clean the copper with:
-Ammonia-based products
-Abrasive powders or liquids
-Rough sponges or scrubbing pads
-Strong acidic cleaners

These products can weaken the protective coating and cause the finish to lose its original appearance over time.

Caring for Brass Range Hoods and Stainless Steel Range Hoods

Brass and stainless steel are durable materials that require relatively simple upkeep. Regular dusting, gentle washing, and thorough drying will help keep the hood clean and attractive.

Remove Surface Dust

Use a clean microfiber cloth to gently remove dust. On stainless steel surfaces, always move the cloth in the same direction as the visible grain.

Wash Away Everyday Residue

Use warm water with a small amount of mild soap. Apply the solution with a soft cloth and gently wipe away grease, fingerprints, and normal kitchen buildup.

After cleaning, dry the entire surface with a clean cloth to help prevent water spots and streaks.

Cleaning Grease From Stainless Steel

When regular soap and water are not enough, use a cleaner or degreaser specifically made for stainless steel.

Apply the product with a soft cloth and wipe in the direction of the metal grain. For more stubborn marks, use a dedicated stainless steel cleaner, then rinse the area and dry it completely.

Simple Care Reminders

To protect the appearance of your range hood:

-Use only soft cotton or microfiber cloths.
-Choose gentle, non-abrasive cleaning products.
-Dry the metal after cleaning.
-Follow the direction of the grain when wiping stainless steel.
-Avoid harsh chemicals and rough cleaning tools.

Consistent, gentle maintenance is the best way to preserve the handcrafted finish of your Artisan Vent Hood.

How to Order a Custom Range Hood

Ordering a made-to-order range hood from Artisan Vent Hood is simple. Follow the steps below to select your design, confirm the details, and track your order through delivery.

1. Choose Your Range Hood

Browse our stainless steel, brass, copper, and zinc range hood collections. Select the design that best fits your kitchen and project style.

2. Customize Your Design

Choose the available options shown on the product page, which may include the hood size, mounting style, body finish, straps, rivets, trim, pot rail, and ventilation configuration.

If you need a custom size, finish, or design detail, contact us before placing your order.

3. Add the Hood to Your Cart

Once you have completed your selections, add the product to your cart. You may include any additional project information or special requests in the order notes.

4. Review Your Order

Before checking out, carefully review the selected model, dimensions, finish, decorative details, ventilation option, shipping information, and order total.

If anything is unclear, please contact our team before completing your purchase.

5. Complete Checkout

Enter your billing and delivery information, then select one of the payment methods available at checkout. After the order is placed, you will receive an order confirmation by email.

6. Review Your Hood Drawing

Our team will prepare a detailed drawing based on the confirmed order information and send it to you for review.

Please check all measurements, proportions, finish details, and ventilation specifications carefully. Changes may be requested during this review stage before the drawing is approved.

7. Approve the Design

Production begins after we receive your drawing approval. Because each hood is made to order, design or measurement changes may not be possible once production has started.

8. Review the Finished Hood

When your range hood is complete, we will send finished-product photos for review before shipment. This gives you an opportunity to view the completed hood before it is packed and dispatched.

9. Shipping and Tracking

After the hood is cleared for shipment, it will be carefully packed and sent to the delivery address on the order.

Tracking or freight delivery information will be emailed when it becomes available. Shipping estimates and delivery terms are governed by our Shipping Policy.

Order Your Range Hood Online

Designing and ordering your custom range hood online is easy. Follow the steps below to choose your finishes, decorative details, dimensions, ventilation system, and shipping option.

Step 1: Choose the Crown Style and Finish

Start by selecting the color and style of the crown at the top of your range hood. Click Crown Color to choose your preferred metal and finish. Then select a Crown Type or choose No Crown for a simpler look. As you make your selections, the 3D model will update so you can see how your custom hood will look.

Step 2: Choose the Body and Apron Colors

Next, choose the main colors for your range hood. Select the Body Color for the main section of the hood. Then choose an Apron Color for the lower section. You can use the same finish for a clean, coordinated look or mix different finishes to create more contrast. The 3D model will update as you make your selections, so you can preview the color combination before continuing. Some premium and custom finishes may include an additional charge, which will be added to the price automatically.

Step 3: Choose the Strap Color

Next, choose whether you would like decorative straps on the body of the hood. Select No Strap for a clean, simple design, or choose a strap finish that complements or contrasts with the main body color. Your selection will appear on the 3D model immediately.

Step 4: Choose the Rivet Style and Color

If you would like decorative rivets, select your preferred Rivet Type, such as round or square rivets. Then choose the Rivet Color. You can coordinate the rivets with the straps or select a different finish to create more contrast. Choose No Rivet if you prefer a smoother, more minimal look.

Step 5: Add a Pot Rail

Choose whether you would like to add a decorative pot rail to the front of the hood. Select No Pot Rail if you do not need one, or choose your preferred Pot Rail Color from the available finishes. Some pot rail finishes may have an additional charge. Any price change will be shown on the page automatically.

Step 6: Select the Size, Mounting Type, and Ventilation

Open the Dimensions & Mount section and choose the following options:
Mount Type: Select a wall-mount or island-mount design.
Width: Choose the width that fits your cooking area.
Height: Select the hood height based on your ceiling height and kitchen layout.
Ventilation: Choose your preferred liner, internal motor, remote blower, ductless system, or hood-only option.
Next, open Shipping Options and select the available shipping method.
Review the updated design and total price. Once everything looks correct, click Add to Cart.
If you need a custom size or are unsure which ventilation option to select, please contact us before placing your order.

Step 7: Review Your Cart

Carefully review all your selected options in the shopping cart, including:
Body and decorative finish colors
Crown style
Strap and rivet selections
Pot rail
Mounting type
Width and height
Ventilation system
Shipping option
Final price

If you have a discount code, enter it in the Coupon section and click Apply.
You may also use the Order Note section to include special instructions or additional information about your project.

When everything is correct, click Check Out. You may also select the PayPal button if you prefer to check out directly with PayPal.

Step 8: Enter Your Information and Complete Payment

Enter your email address and delivery information, including your name, shipping address, ZIP code, and phone number. After entering the shipping address, review the available shipping method and final order total.

Choose your preferred payment method:
Credit or debit card
PayPal

Review your information one final time, then click Pay Now to complete your order. After your order is placed, our team will contact you to confirm the details and prepare the production drawing for your approval. Production will begin after the drawing has been reviewed and approved.

Need Help Before Ordering?

If you are unsure about sizing, finishes, ventilation, or custom design options, contact Artisan Vent Hood before placing your order.

Share your kitchen measurements, project drawings, and inspiration images, and our team will help you identify the information needed for the next step.

Contact Us at info@artisanventhood.com

At Artisan Vent Hood, we offer several secure and convenient payment options so you can choose the one that works best for you.

Accepted Payment Options

We currently accept:

-Visa
-Mastercard
-American Express
-Discover
-Diners Club
-JCB
-Paypal

50% Deposit Option

You can place your order with a 50% deposit and pay the remaining balance before your range hood ships. To use the deposit option, simply email us a screenshot of your shopping cart, and our team will send you a custom payment link.

Please note: Once you approve the final production drawing, the deposit becomes non-refundable.

If Your Payment Is Declined

If you’re unable to complete your payment, please try the following:

-Double-check your card number, expiration date, billing address, and other payment details.
-Make sure your card is active and has sufficient available funds.
-Contact your bank to confirm that the transaction is not being blocked for security reasons.
-If applicable, verify that your card is approved for international or online purchases.
-Try another available payment option, such as PayPal, Apple Pay, or Google Pay.
-Check your internet connection and submit the payment again.

If the issue continues, please contact us for assistance.

Taxes, and Order Confirmation

No Added Sales Tax: We do not add sales tax to your order. The total displayed at checkout is the amount you will pay.

Order Confirmation: After your payment has been successfully processed, a confirmation email containing your order details will be sent to the email address provided at checkout. Please keep this email for your records.

Secure Payment Processing

Protecting your payment information is important to us. Artisan Vent Hood does not store or have access to your complete payment details. Transactions are processed through encrypted, SSL-secured payment gateways that follow PCI DSS security standards.

If you have any questions about payment or need help completing your order, please contact our customer service team.